ALKYD RESIN
 
 
GENERAL HEALTH AND SAFETY ASPECTS
 
Skin Contact :

Get medical attention immediately if symptoms occur. Flush contaminated skin with plenty of water.

Continue to rinse for at least 10 minutes. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing, or wear gloves. Wash clothing before reuse. Thoroughly clean shoes before reuse.
 
Eye Contact :

Get medical attention immediately if symptoms occur. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses.
 
Emergency Action :
 
Firefighting : No special firefighting arrangements are necessary
 
Remedial Action and First Aid :
 
In summoning medical assistance explain the nature or the product involved, with any details from the supplier regarding special hazards.
 
Inhalation :
 
Get medical attention immediately if symptoms occur. Move exposed person to fresh air. If fumes are still suspected to be present, the rescuer should wear an appropriate mask or a self-contained breathing apparatus. Keep person warm and at rest. If not breathing, if irregular breathing, or respiratory arrest occurs provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, beltor waistband.
 
Ingestion :
 
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention immediately.
 
Skin Contact :
 
The skin should be washed with water before the emulsion dries; contaminated clothing must be removed to avoid discomfort from adhering resin. Any dried resin film that cannot be washed off can be removed with skin cleansers. Solvents must not be used.
 
Eye Contact :
 
Splashes in the eye must be washed out immediately with clean water for several minutes. SEEK MEDICAL ATTENTION
 
Spillages :
 
Although spillages present little hazard, in the interests of preventing slippery or dangerous surfaces, they should be dealt with as soon as possible before drying.
 
Since 2005 the company is a Holder of the ISO 9001 & 14001 certificate, which guarantees that all operations are conducted according to the sitipulated standards.
 
 
 
Copyright to Mobel Polymers © All rights reserved
Designed & Developed by
EgySol